Omron SYSDRIVE 3G3FV, User Manual, Page: 140 / 400

5-18
Timing Chart
Run/Stop
Multi-step Reference 1
Multi-step Reference 2
Multi-step Reference 3
Jog Reference
Reference 1
Main-speed
Reference 2
Auxiliary-speed
Reference 3
Reference 4
Reference 5
Reference 6
Reference 7
Reference 8
Jog Reference
Note The jog reference setting has priority over the multi-step reference settings.
D
Setting “7” and “1A”: Multi-Accel/Decel Time Selector 1 and 2
Four acceleration times and four deceleration times can be set in the 3G3FV. Set “Multi-Accel/Decel 1
and 2” in multi-function inputs and change the status of these inputs to switch between these accelera-
tion and deceleration times.
Setting Function
7 Multi-Accel/Decel 1 (multi-accel/decel time selector 1)
1A Multi-Accel/Decel 2 (multi-accel/decel time selector 2)
The following table shows which acceleration and deceleration times are selected by each possible
combination of acceleration/deceleration time selectors 1 and 2.
Multi-accel/decel time selector
Acceleration time Deceleration time
1 2
OFF or not set OFF or not set Acceleration time 1 (C1-01) Deceleration time 1 (C1-02)
ON OFF or not set Acceleration time 2 (C1-03) Deceleration time 2 (C1-04)
OFF or not set ON Acceleration time 3 (C1-05) Deceleration time 3 (C1-06)
ON ON Acceleration time 4 (C1-07) Deceleration time 4 (C1-08)
Note The acceleration and deceleration times can be changed while the Inverter is operating.
Basic Operation
Chapter 5