manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 66 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 66

4-20 

Maintaining the Analyzer 

 

4.

 

If necessary, clean the cap and the vent opening. Use the drill bit included in 
the flowcell cleaning kit (

PN 113-B711-01

) to clean blockages in the vent 

opening. 

5.

 

Replace the cap and reconnect the overflow tube. 

Cleaning the Autosampler Aspirate Assembly  

Clean the autosampler aspirate assembly if there is a salt buildup. 

  

BIOHAZARD

 

All products or objects that come in contact with human or animal body fluids 
should be handled, before and after cleaning, as if capable of transmitting 
infectious diseases. Wear facial protection, gloves, and protective clothing. 

The operator should follow the recommendations to prevent the transmission of 
infectious agents in health-care settings as recommended for potentially 
infectious specimens in 

Protection of Laboratory Workers from Infectious 

Disease Transmitted by Blood, Body Fluids, and Tissue

, 2nd. edition; Approved 

Guideline (1997) Document M29-A, National Committee for Clinical Laboratory 
Standards (NCCLS). This document contains complete information on user 
protection and it can be used as reference material for instructions on laboratory 
safety. 

Time: 15 minutes 

Materials required: 

•

 

Cotton swab 

•

 

Deionized water 

•

 

Paper towels 

•

 

Squirt bottle 

Analyzer mode: Off 

To clean the autosampler aspirate assembly 

1.

 

Turn off the analyzer. 

2.

 

Tilt the front cover down. 

3.  Thoroughly rinse the autosampler aspirate assembly with deionized water. 
 

NOTE 

Single aspirate assemblies have one needle, centering collar and air cylinder. 

4.

 

Remove the sample line (

1

) from the bottom of the needle base. 

  

CAUTION

 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments