manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 274 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 274

Methods 

8-5 

 

The rate histogram data consists of 50 points, one taken every 200 milliseconds. 
Each point represents the number of valid cells counted during the last 200 
milliseconds. 

BASO X Histogram 

The BASO X histogram displays the event distributions that correspond to the 
entire x axis of the BASO cytogram. However, it contains only those events on 
the y axis between the noise and basophil thresholds of the BASO cytogram. This 
will include the MN (mononuclear) and PMN (polymorphonuclear) populations. 

The following parameters are derived from the BASO X histogram: 

•

 

The mode channel (MNx) of the MN population on the x axis (1) (The mode 
channel contains the largest number of cells in a particular population.) 

•

 

The mode channel (PMNx) of the PMN population on the x axis (2) 

•

 

The valley channel that separates the MN/PMN populations (3) (The valley 
channel contains the fewest number of cells between two populations.) 

•

 

The relative depth of the valley as expressed by d/D (BASO d/D)  

•

 

The Lobularity Index (LI) value provides an indication of sample 
abnormality. The Ll is the PMN peak channel number on the Baso X 
histogram divided by 14, and it is greater than 1.9 for normal samples. 
Values lower than 1.9 are usually indicative of sample abnormality. 

 

 

BASO Y Histogram 

 

The BASO Y histogram displays 
the event distributions from the 
noise threshold to channel 49 on 
the y axis of the BASO 
cytogram. However, it contains 
only those events on the x axis 
up to the MN/PMN valley 
channel of the BASO cytogram. 
This will include the MN 
(mononuclear) population. 

 

The BASO Y histogram is used to determine the mode channel (MNy) of the MN 
population on the y axis. 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments