manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 324 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 324

Methods 

8-55 

 

RBC Ghosts 

This count includes events in the RBC Ghost area of the PLT Scatter cytogram 
that have refractive indexes lower than 1.350.

 

 

1  RBC Ghost area 
2  Platelet area 
3  RBC Fragment area  

The RBC Ghosts Count is in the same units selected for RBC on the Unit Set 
Configuration window of the System Setup tab. 

MPC

 

Mean Platelet Component Concentration 

MPM

 

Mean Platelet Dry Mass 

PCDW

 

Platelet Component Distribution Width 

PDW

 

Platelet Volume Distribution Width 

PMDW

 

Platelet Dry Mass Distribution Width 

PCT

 

Platelet Crit  

RBC Fractional Dead Time

 

The fraction of time that the channel is busy processing flowcell events. While 
the RBC/Plt channel is busy identifying a particular flowcell event, it is unable to 
process any additional events that might occur. By measuring this "dead time", 
the analyzer can compensate for the missed events. 
Note that the RBC / Plt channel dead time has RBC and platelet components. 

Corrected Platelet Count

 

The corrected platelet count is calculated using the P Count-2D , R Count-2D 
RBC Fractional Dead Time , and RBC Valid Cells. 

P Count-2D

 

The number of cells identified as platelets and large platelets. The platelets are 
obtained from the PLT Scatter cytogram, and the large platelets are obtained 
from the integrated analysis. 

R Count-2D

 

The count of RBCs, RBC ghosts, and RBC fragments that is obtained from the 
integrated analysis. 

Number of red cells-2D

 

(R Count-2D x RBC Valid Cells) 

÷

 (R Count-2D + P Count-2D)  

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments