manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 160 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 160

6-42 

Flags 

 

The RBC Irregular Flow Rate flag is triggered if the cell counting rate is erratic 
because of a hydraulic disturbance in the RBC/PLT channel.   

RBC flow rate is evaluated in terms of the cell counting rate: 

Flow Uniformity =

Sum of the Squared Differences

9 x Mean Cell Counting Rate

 

The flag is triggered if this value is greater than 3.2.The RBC Rate Histogram 
displays the arrival rate of cells in the RBC channel. 

Normal RBC Rate Histogram 

 

RBCIFR RBC Rate Histogram 

 

Results Flagged

 

RBC, HCT, MCV, MCH, MCHC, CHCM, CH, CHDW, RDW, HDW, PLT, 
MPV, PDW 

 

Corrective Action

 

1.

 

Check RBC reagents. 

2.

 

Check RBC hydraulics. 

3.

 

Check sheath delivery. 

4.

 

Check the pressure and vacuum readings. 

A partially clogged RBC/baso/retic sheath filter can produce a distinctive “ski 
slope” effect on the RBC, Baso, and Retic flow rate histograms. Replace the 
sheath filter. 

RBC Rate 

Baso Rate 

Retic Rate 

 

 

 

Retic – Plt Interference Error (RTCint, CT) 

Definition 

The RTCint flag is triggered if the platelet threshold is set below scatter channel 
5. If the flag is triggered, platelets may be counted in the gated mature RBC 
population. 

Results Flagged

 

%RETIC, #RETIC, CHg, CHr, CHCMg, CHCMr, CHDWg, CHDWr, MCVg, 
MCVr, RDWg, RDWr 

Corrective Action

 

1.

 

Check retic reagents. 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments