manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 106 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 106

Troubleshooting the Analyzer 

5-39 

 

2.

 

Unscrew the securing cap to which the 
power cable (

2

) is attached. Carefully pull 

the lamp assembly out of the optics lamp 
housing. The lamp assembly includes the 
lamp, the power cable, and the securing 
cap. Discard the entire assembly.  

 

 

 

VIEW FROM 

BACK OF PEROX 

OPTICS ASSEMBLY

 

3.

 

Insert the replacement lamp assembly.  

  

CAUTION

 

Do not touch the glass bulb. If necessary, clean with lens paper and methyl 
alcohol. 

4.

 

Replace the securing cap, then connect the red power connector. 

5.

 

Turn the analyzer on and align the lamp to maximize its output.  
(See page 5-4 for instructions.) 

Replacing the perox flowcell  

Time:   Installation - 15 minutes 

Checkout - 15 minutes 

Analyzer mode: Standby 

  

BIOHAZARD

 

All products or objects that come in contact with human or animal body fluids 
should be handled, before and after cleaning, as if capable of transmitting 
infectious diseases. Wear facial protection, gloves, and protective clothing. 

The operator should follow the recommendations to prevent the transmission of 
infectious agents in health-care settings as recommended for potentially 
infectious specimens in 

Protection of Laboratory Workers from Infectious 

Disease Transmitted by Blood, Body Fluids, and Tissue

, 2nd edition; Approved 

Guideline (1997) Document M29-A, National Committee for Clinical Laboratory 
Standards (NCCLS). This document contains complete information on user 
protection and it can be used as reference material for instructions on laboratory 
safety. 

IMPORTANT 

An inspection scope must be available for this procedure. Do not remove the 
flowcells unless you are trained in how to align and focus them. 

To remove the flowcell 

1.

 

Make sure that the analyzer is in the Standby mode. 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments