manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 438 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 438

 

10-32 

ADVIA Autoslide Slide Maker Stainer 

 

2.

 

White WL, Erickson MM, Stevens SC. Practical Automation for the Clinical 
Laboratory

.

 St. Louis, MO, CV Mosby Co., pp 476-487 (1972)  

3.

 

Moss ED. Automated Slide Staining in Haematology. 

Can. J. Med. Tech.

 

30 

(5)

: 169 (1968) 

 

Wright Giemsa Method 

Intended Use 

The Wright Giemsa method is for in vitro diagnostic use in the differential 
staining of blood, bone marrow and body fluid smears on the ADVIA Autoslide 
Slide Maker Stainer. Stained smears are evaluated to identify and quantify cells 
in whole blood and other specimens to aid clinicians in the assessment of various 
clinical conditions. 

Summary and Explanation 

The reagent protocol for the Autoslide Slide Maker Stainer consists of a modified 
polychrome methylene blue-eosin stain  and is based on the original stain 
proposed by Romanowsky.  

The ADVIA Autoslide Slide Maker Stainer is a smart, fully automated system. It 
is capable of producing stained smears on all specimens run on the ADVIA 
2120/2120i or only on samples with predefined criteria (i.e. flags or parameter 
threshold). The Autoslide also provides a direct access port to the stainer for pre-
smeared slides.  

Staining Protocol 

The following is a brief description of the staining protocol: 

 

1.

 

Dispensing Modified Wright or Wright-Giemsa Stain (DN1).

 

2.

 

Slide introduction. 

3.

 

Draining Modified Wright or Wright-Giemsa Stain  (AN3). 

4.

 

Dispensing diluted Modified Wright or Wright-Giemsa Stain  (DN3). 

5.

 

Draining (AN7). 

6.

 

Dispensing rinsing solution (distilled water) (DN7). 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments