manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 279 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 279

8-10 

Methods 

 

Location of Atypical Lymphocytes on the BASO Cytogram 

Atypical Lymphocytes

 

appear within the 
mononuclear (MN) area (1) 
on the BASO cytogram. 

 

Location of Immature Granulocytes on the BASO Cytogram 

Immature Granulocytes 

appear within the MN area 
on the BASO cytogram. 

 

Location of NRBCs on the BASO Cytogram 

Nucleated Red Blood 
Cells (NRBCs)

 appear 

within the PMN population 
on the BASO cytogram. 
However, NRBCs are 
identified for flagging 
purposes in the peroxidase 
method. 

The system uses data from 
the perox channel and the 
baso channel to derive the  

Nucleated Red Blood Cell (NRBC) count (%NRBC and 
#NRBC). If NRBCs are present, the system corrects the WBC 
results to account for them.

 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments