manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 132 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 132

6-14 

Flags 

 

Sample Related 

System Related 

•

 

Macrocytic anemia 

•

 

Alcoholism 

•

 

Hemolytic anemia 

•

 

Myelodysplastic anemia 

•

 

Neonatal samples 

1.

 

Check the RBC reagents. 

2.

 

Check the RBC hydraulics. 

3.

 

Check the RBC gains. 

4.

 

Check the laser flowcell alignment. 

Microcytosis (MICRO) 

Definition 

The Microcytosis flag is triggered if the percentage of red blood cells with lower 
than normal cell volumes (%MICRO) is equal to or greater than 2.5%.  

The %MICRO parameter indicates the percent of red blood cells that have a 
volume equal to or lower than 60 fL and is derived from the RBC volume 
histogram. 

Default trigger values for the three severity levels are: 

+ 

%MICRO = 2.5% to 6.4% 

++ 

%MICRO = 6.5% to 10.5% 

+++ %MICRO 

> 

10.5% 

The %MICRO value is intended for flagging and laboratory purposes only. 

Results Flagged 

none

 

Possible Causes 

The following list of sample-related causes may not contain all conditions that 
could cause this flag.  

Multiple occurrences of this flag, especially for consecutive samples, can indicate 
a system problem. However, isolated instances of this flag are usually sample 
related. 

Sample Related 

System Related 

•

 

Iron deficiency anemia· 

•

 

Hemoglobinopathies· 

•

 

Hemolytic anemias 

1.

 

Check the RBC reagents. 

2.

 

Check the RBC hydraulics. 

3.

 

Check the RBC gains. 

4.

 

Check the laser flowcell alignment. 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments