manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 135 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 135

Flags 

6-17 

 

Platelet Clumps (PLT-CLM, NW) 

Definition 

Presence of clumped platelets is suspected. 

The Platelet Clumps flag is triggered if the Clumps Count in the PLT Clumps 
region of the Perox cytogram is greater than 150. The PLT count is flagged to 
alert the user that the platelet count may not be accurate due to the presence of 
platelet clumps. 

The PLT Clump area of the Perox cytogram originates in the Noise area and 
extends upward to the right of the lymphocyte population. The number of events 
obtained from this area is called the Clumps Count. 

The Clumps Count is excluded from the WBCP and differential results. 

There is no severity level associated with this flag. 

Perox Cytogram  

Normal Sample 

Perox Cytogram  

PLT-CLM flag 

 

 

   1 = PLT Clumps area 

Results Flagged 

WBCP, PLT, PCT, MPV, and PDW 

Possible Causes 

The following list of sample-related causes may not contain all conditions that 
could cause this flag.  

Multiple occurrences of this flag, especially for consecutive samples, can indicate 
a system problem. However, isolated instances of this flag are usually sample 
related. 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments