manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 129 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 129

Flags 

6-11 

 

Results Flagged 

none 

Possible Causes 

The following list of sample-related causes may not contain all conditions that 
could cause this flag.  

Multiple occurrences of this flag, especially for consecutive samples, can indicate 
a system problem. However, isolated instances of this flag are usually sample 
related. 

Sample Related 

System Related 

•

 

Myelocytic leukemia 

•

 

Chronic infections 

•

 

Neonatal samples 

1.

 

Troubleshoot the baso channel. 

2.

 

Troubleshoot the perox channel. 

3.

 

Check the baso and perox gains. 

Large Platelets (LPLT) 

Definition 

The Large Platelets flag is triggered if the percentage of large platelets (%LPLT) 
is greater than 10% of the platelet count.

 

The %LPLT parameter indicates the percent of platelets with volumes greater 
than 20 fL. This parameter is derived from the Platelet Volume histogram based 
on Integrated Analysis. 

Default trigger values for the three severity levels are: 

+ 

%LPLT = 10.0% to 11.9% 

++ 

%LPLT = 12.0% to 14.0% 

+++ 

%LPLT > 14.0% 

The %LPLT value is intended for flagging and laboratory purposes only. 

Results Flagged 

none

 

Possible Causes 

The following list of sample-related causes may not contain all conditions that 
could cause this flag.  

Multiple occurrences of this flag, especially for consecutive samples, can indicate 
a system problem. However, isolated instances of this flag are usually sample 
related. 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments