manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 334 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 334

Methods 

8-65 

 

1.

 

The analyzer scans for the absorption mode between channels 2 and 25 on 
the x axis. 

2.

 

The standard deviation (SD) of the six channels on either side of the mode is 
calculated. 

3.

 

The RTC threshold is set 3.2 SD from the mode channel to separate the 
mature RBCs from the reticulocytes. 

Two additional thresholds (4)(5) are set on the x axis to separate the reticulocyte 
population by their stages of maturation. The youngest reticulocytes have the 
highest amounts of RNA (absorption), and appear further out on the x axis. 

1.

 

The RTC threshold channel is subtracted from 75, and the resulting 
difference is divided by three. 

2.

 

The Low/Medium RTC threshold (4) is set to the RTC threshold channel 
plus the value calculated in step 1. 

3.

 

The Medium/High RTC threshold (5) is set to the Low/Medium RTC 
threshold channel plus the value calculated in step 1. 

RETIC V / HC Cytogram 

 

On the V/HC cytogram, 
hemoglobin concentration is 
plotted along the x axis, and 
cell volume is plotted along 
the y axis.  

Cells identified as mature 
RBCs are red; while cells 
identified as reticulocytes 
are cyan. 

RETIC Scatter Cytogram 

The RETIC Scatter cytogram is the graphic representation of two light-scatter 
measurements: the high-angle, low-gain light scatter is plotted along the x axis, 
and the low-angle, low-gain light scatter is plotted along the y axis. Cells 
identified as mature RBCs are colored red; while cells identified as reticulocytes 
are colored cyan.  

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments