Siemens ADVIA 2120 Operator'S Manual Download Page 15

Page: 15 / 477

Welcome to the ADVIA 2120/2120i Hematology System

1-11

The sample pumps (

)

dispense an exact amount
of reacted sample (

) from

the appropriate reaction
chamber (

) into the

flowcells (

The sheath diaphragm
pumps (

) push the sheath

(

) through the sheath

filters (

) directly into the

flowcells.

The sheath pumps (

) pull

the PEROX SHEATH or
SHEATH / RINSE and the
reacted sample stream (

)

through the flowcells for
analysis.

The analyzed sample and
sheath are sent to waste
(

) and the lines,

flowcells, and reaction
chambers are washed and
rinsed.

V15

V16

V17

V18

DP1 (V26)

V24

V25

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Search results

Summary of Contents for ADVIA 2120

Reviews:

Siemens ADVIA 2120, Operator'S Manual, Page: 15 / 477

Search results

Summary of Contents for ADVIA 2120

Reviews: