manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 427 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 427

 

ADVIA Autoslide Slide Maker Stainer 

10-21 

 

3.

 

Partial draining of May-Grünwald Stain (Stain 1) (AN2).

 

4.

 

Dispensing Buffer to dilute May-Grünwald Stain (Stain1) (DN3).

 

5.

 

Draining (AN3).

 

6.

 

Dispensing diluted Giemsa Stain (Stain 2) (DN3).

 

7.

 

Draining (AN7).

 

8.

 

Dispensing rinsing solution (distilled water) (DN7).

 

9.

 

Draining (AN7). 

10.

 

Dispensing rinsing solution (distilled water) (DN7). 

11.

 

Draining (AN7). 

12.

 

Draining (AN4). 

13.

 

Dispensing methanol (DN4). 

14.

 

Slide removal 

Needle Position 

Action 

DN1 (Undil. Stain 1) 

32 

1 

DN2 (Buffer) 

8 

1 

DN3 (Dil. Stain 2) 

13 

1 

DN4 (Methanol) 

31 

0 

DN7 (Rinse) 

18 

2 

AN2 8 

1 

AN3 13 

1 

AN4 31 

1 

AN7 18 

3 

Methanol Volume (mL)  1.6 
Stain Volume (mL) 

3.6 

Dilution Ratio (%) 

5 

Duration Long 

Principle of the Procedure 

The 2 staining mixtures used by this protocol have very distinct proprieties. The 
May-Grünwald (STAIN 1) stains acidophilic sites of cells and the neutrophilic 
granulations of leukocytes, whereas the Giemsa (STAIN 2) stains the cytoplasm 
of the monocytes and lymphocytes, as well as the nuclear chromatin. The stained 
smear is examined microscopically and cells are then manually differentiated and 
quantified. 

Cell Type 

Cell Component 

Color 

Neutrophils Nuclei 

Deep 

purple 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments