manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 333 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 333

8-64 

Methods 

 

CHDWg 

Cellular Hemoglobin Distribution Width is the 
standard deviation (SD) of the RETIC CH 
histogram for the gated cells. 

CHDW Delta 

CHDWr - CHDWm 

RETIC Scatter Abs Cytogram 

The RETIC Scatter ABS cytogram is the graphical representation of the 
absorption and light-scatter measurements: the high-gain, absorption (cell 
maturation) is plotted along the x axis and the high-angle, low-gain light scatter 
(cell size) is plotted along the y axis. 

 

 

1  RTC Platelet threshold 
2  RTC Coincidence threshold 
3  RTC threshold 
4  Low/Medium RTC threshold 
5  Medium/High RTC threshold 
A  Mature RBCs 
B  Low absorption retics 
C  Medium absorption retics  
D  High absorption retics  
E  Platelets 
F  Coincidence events

 

The two thresholds on the y axis (1)(2) are set as follows: 

1.

 

The analyzer scans for the scatter mode between channels 10 and 99 on the y 
axis. 

2.

 

The mean channel and standard deviation (SD) are calculated.  

3.

 

The RTC Platelet threshold (1) is set at the mean channel minus 3.5 SD to 
separate the platelets from the mature RBCs and reticulocytes. 

4.

 

The RTC Coincidence threshold (2) is set at the mean channel plus 3.5 SD to 
separate the coincident cells from the mature RBCs and reticulocytes. 

The RTC threshold (3) on the x axis is set as follows: 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments