manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 146 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 146

6-28 

Flags 

 

System Related 

Sample Related 

1.

 

Check baso reagents. 

2.

 

Check baso hydraulics. 

3.

 

Check the pressure and vacuum readings. 

4.

 

Check sheath delivery. 

5.

 

Check the baso reaction chamber 
temperature. 

6.

 

Check RBC/Baso/Retic flowcell alignment. 

•

 

Lipemia 

•

 

High WBC count 

•

 

Extreme eosinophilia 

•

 

Malaria parasites 

•

 

Aged Blood 

Baso No Valley (B-NV, VB) 

Definition 

The Baso No Valley flag is triggered if there is no valid separation between the 
mononuclear (MN) and polymorphonuclear (PMN) populations in the Baso 
cytogram. The B-NV (VB) flag is not triggered if agreement between the baso 
and perox results is indicated by both the following conditions:  

•

 

WBCB and WBCP agree within specified limits (No WBC-CE flag) 

•

 

[(%NEUT + %EOS) - %PMN] is between 0 and 7.5 

Separation of the MN and PMN populations along the x axis of the Baso 
cytogram is evaluated by the relative depth of the valley between the two 
populations. 

In normal samples, the relative Baso d/D is greater than 0.15. The B-NV flag is 
triggered if the relative depth is less than 0.15 and there is no agreement between 
perox and baso results. 

Normal 

 

 

1 MN 

peak 

2 PMN 

peak 

A MN/PMN 

Valley 

 

 

B-NV (VB) Flag 

 

 

 

 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments