manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 218 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 218

Status Line messages 

7-49  

 

F 

File Does Not Exist 

A patient or control result printout has been selected in the Routine Parameters 
window. But one of the files, Report.par, Prevalid.par, Print.par, or QCreport.par, 
is not defined.  

Corrective Action 

Restore dictionaries in Other Utilities window. 

 

File Not Found: C:\Wst\Oen.cnf 

The default workorder screen configuration file is missing.  

Corrective Action 

Continue to create workorders in Order Entry as needed. To restore the Oen.cnf 
file, select Other Utilities and restore dictionaries. 

 

File Not In Modifiable File List - Updating 

This message appears when a file is created through the Format window. The file 
is then stored in the database. 

Corrective Action 

No action is required. 

 

G 

GETEQUAL 

This control is not defined in the Control Dictionary.  

Corrective Action 

Define the control in the Control Dictionary. 

 

GlobalLock or GlobalUnlock 

The selected dispositions cannot be stored because the sample record is full.  

Corrective Action 

Reduce the number of dispositions selected or cancel the selections and create a 
new workorder through the Order Entry window. 

 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments