manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 113 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 113

5-46 

Troubleshooting the Analyzer 

 

Materials required: 

•

 

Flat-head screwdriver, 
large 

•

 

Paper towels 

•

 

Vacushield filter 
PN 518-3146-01 

Time: 
Replacement - 10 minutes 
Checkout - 10 minutes 

Analyzer mode: Off 

The words 

FLUID SIDE 

are imprinted on each filter. 

Location of the filters: 

manual (

1

) and automatic (

2

) waste containers 

  

BIOHAZARD

 

All products or objects that come in contact with human or animal body fluids 
should be handled, before and after cleaning, as if capable of transmitting 
infectious diseases. Wear facial protection, gloves, and protective clothing. 
 
The operator should follow the recommendations to prevent the transmission of 
infectious agents in health-care settings as recommended for potentially 
infectious specimens in 

Protection of Laboratory Workers from Infectious 

Disease Transmitted by Blood, Body Fluids, and Tissue

, 2nd edition; Approved 

Guideline (1997) Document M29-A, National Committee for Clinical Laboratory 
Standards (NCCLS). This document contains complete information on user 
protection and it can be used as reference material for instructions on laboratory 
safety. 

To replace the filter 

1.

 

Place paper towels under the filter. 

2.

 

Disconnect and discard the filter. 

3.

 

Install the new filter. 

IMPORTANT

 

The direction of the filter is important. Look for the words FLUID SIDE on 
the filters and orient the filters in the lines as shown in the figure above. 

4.

 

Discard the paper towels. 

5.

 

Turn the analyzer power on. 

  

CAUTION

 

To avoid serious damage to the analyzer, you must never turn on the analyzer 
without the vacushield filter in place. 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments