Siemens ADVIA 2120 Operator'S Manual Download Page 182

Page: 182 / 477

Status Line messages

7-13

Auto Startup - Started

Auto Startup has begun on schedule.

Auto Startup Canceled

The System canceled the scheduled Auto Startup in accordance with user
cancellation.

Auto Startup is Due - Will Start at End of Run

The scheduled Auto Startup will begin at the end of sample processing or
hydraulic cycles.

Auto Startup Missed

The scheduled Auto Startup was missed and did not occur while the Exerciser or
System Setup tab was open.

Auto System Wash - Exiting Standby

The System moved from Standby to Ready-to-Run, enabling the scheduled Auto
System Wash.

Auto System Wash Canceled

The System canceled the scheduled Auto System Wash in accordance with user
cancellation.

Auto Wash - Started

The Auto System Wash started on schedule.

Auto Wash is Due - Will Start at End of Run

The scheduled Auto System Wash will begin at the end of sample processing or
hydraulic cycles.

Auto Wash Missed

The scheduled Auto System Wash was missed and did not occur while the
Exerciser or System Setup tab was open.

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Search results

Summary of Contents for ADVIA 2120

Reviews:

Siemens ADVIA 2120, Operator'S Manual, Page: 182 / 477

Search results

Summary of Contents for ADVIA 2120

Reviews: