manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 149 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 149

Flags 

6-31 

 

Results Flagged

 

WBC, WBCB, %BASO, #BASO, %LYMPH, #LYMPH 
A four-part WBC differential (basophils excluded) is reported with the measured 
BASO values displayed and flagged, and with the LYMPH and LUC values also 
flagged. 

Corrective Action

 

1.

 

Check the baso reaction chamber temperature. 

2.

 

Check the reaction chamber temperature controller, including the electrical 
connection. 

Comparison Error MCHC / CHCM (CHCMCE, CC) 

Definition 

The Comparison Error MCHC/CHCM flag is triggered if the difference between 
the MCHC and CHCM values is greater than 1.9. 

Results Flagged

 

MCHC, CHCM, RBC, MCV, HGB, HCT, MCH, RDW, HDW, CH, CHDW 

Corrective Action

 

Multiple occurrences of this flag, especially for consecutive samples, can indicate 
a system problem. However, isolated instances of this flag are usually sample 
related. 

The following list of sample-related causes may not contain all conditions that 
could cause this flag. There is no intention to associate the flag with specific 
diagnoses. 

System Related 

Sample Related 

1.

 

If another flag appears along with the 
comparison error, troubleshoot that error first. 

2.

 

To determine the faulty channel, run the same 
normal whole blood sample five times to 
check precision of the RBC, MCV, and HGB 
values. Then, run a normal-level control to 
check accuracy. 

a.

 

If all results are acceptable, calibrate 
RBC, MCV, CHCM, and HGB 
parameters. 

b.

 

If the HGB results are faulty, troubleshoot 
the hemoglobin channel. 

c.

 

If RBC or MCV results are faulty, 
troubleshoot the RBC channel. 

•

 

Lipemia 

•

 

Leukemia  
(high WBC) 

•

 

Neonatal (NRBCs)  

•

 

Hemolytic anemias 

•

 

Cold agglutinins 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments