manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 14 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 14

 

1-10 

Welcome to the ADVIA 2120/2120i Hematology System  

 

These voltage readings correspond to the amount of transmitted light that passes 
through the reaction chamber when it contains sample mixed with reagent or 
rinse. 

The voltage readings are then converted to a digital form by the Hgb Interface 
Board and sent to the analyzer 

CPU

 

to calculate the optical density and derive the 

Hgb concentration. 

Sample, Sheath, and Diaphragm Pumps 

2
1

3
4

 

The perox sample (

1

) and sheath (

2

) pumps are located on the left side of the analyzer. 

The RBC/baso/retic sample (

3

) and sheath (

4

) pumps are located on the right side 

of the analyzer. 

The diaphragm pumps for sheath, rinse, and wash (five in all) are located above 
the reagent containers.

 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments