manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 410 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 410

 

10-4 

ADVIA Autoslide Slide Maker Stainer 

 

Do

 not

 replace hoses. Contact your local technical service provider or distributor for this 

procedure. 

Stainer access door 

  

WARNING

  

  

BIOHAZARD

 

To avoid operator injury, the access doors on ADVIA Autoslide Slide Maker Stainer are 
equipped with sensors that stop Autoslide operation when opened.  

Wear personal protective equipment. Use universal caution. For complete biohazard 
statement, refer to section on Autoslide Safety Information and Warnings. 

When the stainer access door is opened during Autoslide operation, all Autoslide actions 
stop. 

Autoslide Rear Panel 

 

 

Key: 

  

 

 

 

 

Rinse Buffer Water 

Water 

Sensor 

Stain Waste 

Sensor 

  

  

 

 

  

Methanol 

Stain 1 

Stain 2 

 

Stain Waste 

Fan 

 

 

CAUTION

  

Do not obstruct fan 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments