manualshive.com logo in svg

Siemens ADVIA 2120, Operator'S Manual, Page: 446 / 477

Share
Download
Siemens ADVIA 2120 Operator'S Manual Download Page 446

 

10-40 

ADVIA Autoslide Slide Maker Stainer 

 

Performing Weekly Shutdown and Startup 

The weekly shutdown provides a thorough cleaning of the fluidics circuit and 
must be performed once a week. Failure to perform the shutdown procedure 
regularly can result in line clogs. 

 

 

TOXIC

 

Methanol is toxic. To avoid serious irreversible effects do not inhale, do not 
contact with skin and do not swallow. Wear suitable protective clothing and 
gloves. In case of accident or if you feel unwell, seek medical advice 
immediately. 

  

FLAMMABLE

 

Methanol is flammable. Keep away from sources of ignition - no smoking. 

To perform a weekly shutdown 

1.

 

On the ADVIA 2120/2120i software menu, select 

Procedures

, then select 

Clean

 

Autoslide

. 

The Clean Autoslide window opens. 

2.

 

Select 

Weekly Shutdown

 and follow the instructions displayed on the 

window to perform a weekly shutdown. 

3.

 

When the weekly shutdown completes, you must perform a weekly startup 
before slide production can resume. If you want turn the system off after the 
Weekly Shut Down, wait until you are ready to run more samples before 
performing the Weekly Startup. 

4.

 

At the Clean Autoslide window, select 

Weekly Startup

. 

5.

 

Follow the instructions displayed on the window to perform a weekly startup. 

Cleaning the Stainer Wells and Plate 

  

BIOHAZARD

 

All products or objects that come in contact with human or animal body fluids 
should be handled, before and after cleaning, as if capable of transmitting 
infectious diseases. Wear facial protection, gloves, and protective clothing. 

The operator should follow the recommendations to prevent the transmission of 
infectious agents in health-care settings as recommended for potentially 
infectious specimens in 

Protection of Laboratory Workers from Infectious 

Disease Transmitted by Blood, Body Fluids, and Tissue

, 2d edition; Approved 

Guideline (1997) Document M29-A, National Committee for Clinical Laboratory 
Standards (NCCLS). This document contains complete information on user 
protection and it can be used as reference material for instructions on laboratory 
safety. 

Summary of Contents for ADVIA 2120






























































































































































































































































































































































































































































































Reviews:

No comments