Newport MM4006, User Manual

Page: 189 / 411

MM4006
NE S e t trajectory element
where the generation of pulses ends
Usage
■
IMM
■
PGM C MIP
Syntax N E n n or NE?
Parameters
Description n n [ i n t ] N u m b e r of trajectory element where the pulses genera-
tion ends.
Read the number of trajectory element where the puls-
es generation ends.
Range n n 1 to 100.
Units n n N o n e .
Defaults n n M i s s i n g : 1 .
Out of range: E r r o r C.
Description T h i s command sets number of trajectory element where the generation of
pulses ends. The generation of pulses is ended immediately in the end of
this element.
NOTE
As the total element number of a trajectory may be inferior than 100 and
the value of NB must be s the value of NE s the total element number,
this value of NE will be reexamined in NS and ET commands.
Returns I f the sign "?" takes place of the nn value, this command reports the num-
ber of trajectory element where the generation of pulses ends.
Errors A U n k n o w n message code.
B — I n c o r r e c t axis number.
C — Parameter out of limits.
D — Unauthorized execution.
Rel. Commands NB — S e t trajectory element where the generation of pulses starts.
NI — S e t step (curvilinear distance) between Synchronization pulses.
NN — S e t number of synchronization pulses to generate.
Example N E 4 I Generation of pulses ends at the end of the element #4.
NE? I R e a d element number where the generation of pulses ends.
NE4 I Controller tells the value.
ED110181E111020 - 03/03
3.92
( % )
Newport.