Newport MM4006, User Manual

Page: 147 / 411

MM4006
ED D i s p l a y program error
Usage I I I IMM
■
P G M L M I P
Syntax E D n n
Parameters
Description n n [ i n t ] E n a b l e / d i s a b l e code.
Range n n — O to 1.
Units n n — N o n e .
Defaults n n M i s s i n g : E r r o r C.
Out of range: E r r o r C.
Floating point: E r r o r C.
Description T h i s command activates the program execution error display utility. If nn
is set to 1, the program execution will stop every time an error is encoun-
tered and the following message will be displayed on line 5 of the display:
"Program aborted by error: * " where "*" represents the ASCII error code.
On line 6, the last function key will be defined as QUIT and the program will
resume execution after pressing this key.
Setting nn to zero disables the program execution error display utility. This
is the default mode of operation. Any error encountered will stop and ter-
minate the program. To determine the error causing the problem use the
TB or TE commands.
Returns N o n e .
Errors C — Parameter out of limits.
Ref. Commands T B — R e a d error message.
TE — R e a d error code.
Example E D I I A c t i v a t e program execution error display utility.
3EX I S t a r t executing program #3.
EDO I D i s a b l e program execution error display utility.
EDI10181En1020 — 03/03
3.50
c v
Newport.