Newport MM4006, User Manual

Page: 69 / 411

MM4006 L o c a l Mode
Manual Speed
This parameter defines the high velocity of the manual jog mode (using
front panel or joystick). The default value is 50% of the Maximum Speed,
but you can change it to suit your needs. The slow speed manual jog is one
tenth of the high speed.
To change the manual jog high speed, press the MODIFY k e y when the
Manual Speed parameter is displayed. Use the numeric keypad to enter a
new value. Press
VALID t o accept the new setting and return to the previ-
ous menu.
Press the U P k e y to advance to the next parameter.
If W U * S K S S I M U
itataififf
Axis Setup MODIFY U P M O D I F Y
QUIT Q U I T > Y E S > QUIT
ais
ma Nis
VALID
MH — S e t manual velocity.
Minimum Speed (Stepper Motors Only)
This is the start/stop velocity for stepping motors. The allowed start/stop
velocity must be less than veloity of the motion.
If you are setting up a new motion device that has no default parameters
and have defined the scaling speed, press the MODIFY k e y to set the
Maximum speed. Use the numeric keypad to enter a value that is about 80%
of the scaling speed. Press VALID t o accept the new setting and return to
the previous menu.
Press the U P k e y to advance to the next parameter.
Axis Setup MODIFY L. UP
au _ Q U I T y E s .
m o w
' V
VB — S e t base velocity.
ED110181En1020 — 03/03
2.26
c v
N e w p o r t .