Newport MM4006, User Manual

Page: 109 / 411

MM4006 R e m o t e Mode
3.3.3 A x i s Motion Control
Axis configuration
• S w i t c h OFF the controller with the power switch in rear panel and the
STAND-BY b u t t o n in front panel.
• P l u g in the electronic card into axis slot #1 of the controller.
• S w i t c h ON the controller with the power switch in rear panel and the
STAND-BY 1.1111 button in front panel.
• S w i t c h OFF the motor with the MOTOR E U button.
• Select the CONFIG menu then the AXES m e n u .
• P r e s s on the AXIS# k e y to select the axis to be configured.
• P r e s s on key NMI of the keypad of the controller and confirm with the
VALID k e y.
• P r e s s the SELECT k e y to select the type of product to be driven.
• W i t h U P o r DOWN keys, scroll through the list of product types.
• T o select a particular family of product, select the VALID k e y.
• G o through the list of models available with the help of the U P o r
DOWN keys.
• T o select a particular model, press the VALID k e y.
• Va l i d a t e the Pos. Origin, KP, KI, KI), KS parameters with the help of the
VALID k e y.
• P r e s s QUIT .
• Select the MODIFY menu to pour change the parameters of the selected
axis.
• G o through the axis parameters with the help of the U P o r DOWN
keys.
• T o change a parameter, select the MODIFY menu.
• P r e s s ° I n t
• Select the
Y E S k e y to save all axis #1 parameters in the EEPROM.
• T o go back to the main menu press QUIT .
Axis motion control
Run MM4006 Terminal and configure the communication parameters as
indicated previously.
Enter the following instructions:
MO,WT1000, 10R, 1WS,1TP,1PR 1 , IWS, ITP
To execute the instructions press ENTER.
Instructions carried out:
MO
WT1000
lOR
1WS
1TP
1PR1
1WS
: Switch on motor.
: Wait 1 second.
: Search origin on axis #1.
: Wait until end of motion on axis #1.
: Read position on axis #1.
: Cary out relative motion on axis #1.
: Wait until end of motion on axis #1.
: Read position on axis #1.
(%)
ED110181En1020 — 03/03
3.12 N e w p o r t .