Newport MM4006, User Manual

Page: 56 / 411

MM4006 L o c a l Mode
Parity
Parity must be set correctly for the RS-232-C or RS-485 communication to
work properly. As the standard suggests, when a word length of less than 8
is used, the parity bit can be set to Odd o r Even. Both communicating
devices must use the same setting.
The possible settings are Odd, Even and None. The factory default is None.
To change the setting, from the General Setup menu, press u n t i l
the Parity parameter appears on the display. Press MODIFY a n d then
the CHANGE key to select a new parity. Press the
VALID k e y to accept the
entry and return to the previous menu.
(%,
Motor OFF
CHANGE
SETUP G E N . - '
VALID Q U I T Q U I T
UP * 'MODIFY
CMPxx — Set serial communication parity.
XON/XOFF Mode
XON/XOFF mode synchronies work between the transmitter and the receiv-
er. In this mode, XON and XOFF characters are automatically generated
(XOFF if the receipt buffer is almost full and risks to be erased, XON if the
receipt buffer is sufficiently emptied to receive new characters).
To change the setting, from the General Setup menu, press U P u n t i l
the XON/XOFF Mode appears on the display. Press NuMiNt and then
the CHANGE key to select YES. Press the k e y to accept the entry
and return to the previous menu.
The factory default is NO.
Motor OFF
j'.11
SETUP G E N . 111P.
00IT ' O U r r
CMXxx — Set serial communication XON/XOFF mode.
k 1 e v v p o r t . 2 . 1 3 E D 1 1 0 1 8 1 E n 1 0 2 0 —03/03