Newport MM4006, User Manual

Page: 186 / 411

MM4006
MX D e f i n e X position for a
line segment = f (MX, MY)
Usage
■
IMM
■
PGM M I P
Syntax M X n n
Parameters
Description n n [double] — X coordinate to reach with a line segment.
Range n n - 1 0 2 to 1012.
Units n n — Preset units in SETUP mode.
Defaults n n M i s s i n g : E r r o r C.
Out of range: E r r o r C.
Description T h i s command defines to the controller X position to reach with an ele-
ment of trajectory of the type:
Line segment = f (MX, MY).
Returns N o n e .
Errors C — Parameter out of limits.
S — Communication time-out.
V T o o long trajectory.
Y T r a j e c t o r y : Line (x, y). Line expected.
Z T r a j e c t o r y : Line (x, y). Too big discontinuity.
e T r a j e c t o r y : Units not translational or not identical.
Rel. Commands M Y — D e f i n e Y position and build a line segment = f (MX, MY).
XE — T e l l the last element.
Example N T C l e a r trajectory.
MX10 D e f i n e X position of a line segment = f (x, y).
MY10 I D e f i n e Y position an build a line segment = f (x, y).
XE I T e l l last element.
XE, Line (x, y), 10, 10, 45 I Controller tells the built element.
( % )
N e v v p o r t . 3 . 8 9 E D I 1 0 1 8 1 E n 1 0 2 0 — 03/03