Newport MM4006, User Manual

Page: 79 / 411

MM4006 L o c a l Mode
1:
2:
3:
4. Unc
0
0
0 0 0 0 ' - -
onneCted
m
Mtn
E n t e r R E L AT I V E d i s p l a c e m e n t
DELETE Q U I T V A L I D
Fig. 2.10 — Relative motion menu.
All displayed positions become zero and the P. symbol indicates which
numerical value will be changed with the keypad. The position display
becomes zero because the values entered are relative motions. A zero rela-
tive motion, the default value, means that the motor will not move.
Enter a desired positive or negative relative motion. Press the VALID k e y to
accept the value, edit the entry using the DELETE k e y or exit this mode by
pressing the a m k e y .
Once the .1/ k e y is pressed, the 10. symbol moves to the next connected
axis. Enter a numerical value or press
VALID t o accept the zero default.
When the VALID k e y is pressed on the last active axis, the display changes
to a move execution menu. The two active function keys are A L L a n d
QUIT
The QUIT k e y will exit this mode and return to the top level motor-on
menu.
The A L L . k e y will start a relative motion on all axes using the values
entered.
If relative motion values were entered on multiple axes but now you require
only one axis to move, use the numerical keypad to select the axis and start
the motion. Each keypad row controls one axis and the first or last key in the
row determines the direction. The middle key has no effect.
For example, if axis number 1 is to be moved, press the 3 key to start the
motion in the specified direction or the 1 key to move it in the opposite
direction.
NOTE
When the relative motion is complete, the display does not return to the
top level menu. This feature allows the user to repeat relative motions an
unlimited number of times.
Press the QUIT k e y to terminate the relative move mode and return to
the Move menu.
Single Axis Relative Move
MOTOR ON
QUIT
MOVE
M a c 4 4 . 1 1 1 1
yew
moolow
ACID
c v
ED/10181En 1 020 — 03/03
2.36 N e w p O r t .