Festo CMMT-ST-SW, Original Instructions Manual

Page: 502 / 616

ID Px. Parameters Description
Update effective immediately 5517 Basic sampling inter-
val
Unit −
Tab. 432 Parameters
Example
The recording should be started via a data trigger. The recording should start 0.5 s before the trigger
signal (pre-trigger). Only every second measured value should be recorded in the trace memory.
Parameter settings (example)
Parameters Value Comment
Selection of the trigger type
P0.341.0.0 1 Data trigger
Selection of recording delay in the samples
P0.557.0.0 5000 Number of samples before the trigger (5000 * 0.0001 s =
0.5 s)
Selection of down sampling factor
P0.559.0.0 2 Sampling interval should be 100 µs (2 * base time per
sample)
Tab. 433 Parameter settings (example)
Parameters for configuring the trigger event for data triggers
ID Px. Parameters Description
Specifies the axis ID of the trigger signal.
0 = System
1 = axis 1
…
n = axis n
Access read/write
Update effective immediately
6000 Axis ID data trigger
Unit −
Specifies the data ID of the trigger signal.
Access read/write
Update effective immediately
6001 Data ID data trigger
Unit −
Diagnostics and fault clearance
502 Festo — CMMT-ST-SW — 2019-02