Interface
1 Adorner
2 Status symbol
3 Title
4 Close pop-up
5 Description of the display or control element
6 Status message
7 Command area
Fig. 3 Design of an adorner and the pop-up
The description of the display and operating components contains, for example, the following informa-
tion for device parameters or internal parameters:
–
Hexadecimal value of parameter
–
Data type of parameter
–
ID of device parameter or the internal parameter
–
Description of the parameter
Information on structure of IDs of device parameters (P...)
è
3.2.1 Depiction of the parameters.
With internal parameters (I...), the plug-in displays, for example, settings on several device paramet-
ers (P...) or device-independent information.
Changing values using the command area
Depending on the device parameter, the values can be changed via the command area of the pop-up.
The value is applied by actuating the corresponding button.
Actuate the
Description
"Minimum"
Resets the device parameter to the minimum value shown.
"Maximum"
Resets the device parameter to the maximum value shown.
"Default"
Resets the device parameter to the standard value shown.
"Recomm. minimum"
Resets the device parameter to the recommended minimum value shown.
"Recomm. maximum"
Resets the device parameter to the recommended maximum value shown.
"Last saved"
Resets the device parameter to the most recently saved value in the
project.
CMMT-ST Plug-in
20
Festo — CMMT-ST-SW — 2019-02
Summary of Contents for CMMT-ST-SW
Page 615: ......
