Fig. 21 Identification of a non-existent consecutive record
5. Define consecutive record for record link.
Records that have already been created and non-existent records can be specified as the consec-
utive record.
If a non-existent record is specified as the consecutive record, this is indicated by a symbol next to
the number of the consecutive record in the record list.
6. Actuate "Apply transition" button.
Ä
The record link is displayed underneath the record for which it was created.
1 Overview of a record link
2 Indication that this record is part of a record
link
3 Tool tip that displays the record links that
refer to this record
Fig. 22 Elements of a record link
Deleting and editing records and record links
Records and record links can be edited or deleted via the corresponding and
buttons next to the
record or record link (
è
Tab. 38 Description of the symbols in the "Record list"
If a record type that has not been described is specified, this is indicated by a symbol next to the
record number in the record list. The
("Edit record set") is deactivated.
Executing or stopping a record
The commands are called up via the symbols"Execute record set" and"Stop record set"
è
Tab. 38 Description of the symbols in the "Record list"
parameter panel.
Records can be executed or stopped if the following prerequisites are met:
–
The plug-in is connected to a device.
CMMT-ST Plug-in
66
Festo — CMMT-ST-SW — 2019-02
Summary of Contents for CMMT-ST-SW
Page 615: ......
