Festo CMMT-ST-SW, Original Instructions Manual

Page: 353 / 616

ID Px. Parameters Description
Specifies the limit value "Maximum output voltage" for the out-
puts of the PI-elements (reactive current/active current) in the
current regulator.
Access read/−
Update effective immediately
88 Maximum output
voltage
Unit V
Specifies the actual value of the phase V current.
Access read/−
Update effective immediately
310 Actual phase V cur-
rent value
Unit A
Specifies the actual reactive current at the output of the current
transformation.
Access read/−
Update effective immediately
813 Actual reactive cur-
rent value
Unit Arms
Specifies the actual active current at the output of the current
transformation.
Access read/−
Update effective immediately
814 Actual active current
value
Unit Arms
Activate equalisation of the control parameters of the current
regulator for active current and reactive current
–
0: inactive; for the calculation of the controller parameters,
the plug-in only calculates the active current regulator. The
reactive current regulator remains unaffected.
– 1: active; for the calculation of the controller parameters,
the plug-in synchronises the parameters for the active cur-
rent and the reactive current.
Access read/write
Update effective immediately
819 Control parameter
equalisation for active
and reactive current
regulators
Unit −
Control
353 Festo — CMMT-ST-SW — 2019-02