Festo CMMT-ST-SW, Original Instructions Manual

Page: 165 / 616

ID Px. Parameters Description
Specifies the current position of the singleturn scanning of the
encoder.
Access read/−
Update effective immediately
3603 Single-turn position
Unit −
Specifies the current position of the multiturn scanning of the
encoder.
Access read/−
Update effective immediately
3604 Multi-turn numerator
Unit −
Specifies the size of the BiSS-C checksum in bits.
Access read/−
Update effective immediately
3610 CRC BiSS-C
Unit −
Defines the baud rate at which the encoder data is transmitted.
Access read/write
Update reinitialization
3612 Baud rate
Unit −
Determines whether the correction table of the encoder is used.
This means:
–
0: inactive
– 1: active
Access read/write
Update effective immediately
3613 Activation of correc-
tion table
Unit −
Defines whether the extended encoder data of the encoder
should be used.
This means:
–
0: inactive
– 1: active
Access read/write
Update reinitialization
3618 Activation read out
extended encoder
data
Unit −
Product configuration
165 Festo — CMMT-ST-SW — 2019-02