Festo CMMT-ST-SW, Original Instructions Manual

Page: 71 / 616

Transferring active parameter to closed-loop settings record
Active closed-loop settings can be transferred to a closed-loop settings record via the ("Apply act-
ive parameter to closed-loop settings record") button.
The button is only active if the following prerequisites are met:
–
A complete drive configuration has been created.
–
The plug-in is
not
connected to a device.
Proceed as follows to transfer the active closed-loop settings to a closed-loop settings record:
1. Actuate the
("Apply active parameter to closed-loop settings record") button on upper edge of
the parameter panel.
Ä A pop-up to select the closed-loop settings record opens.
2. Click checkbox for required closed-loop settings record.
3. Actuate "Apply" button.
Ä
The active closed-loop settings are transferred to the selected closed-loop settings record.
Overview of the closed-loop settings records
An overview of the existing closed-loop settings records is displayed at the bottom of the parameter
panel.
Symbol Description
Edit closed-loop settings record.
Apply closed-loop settings record to active parameter.
Tab. 40 Description of the symbols in the overview
The buttons are only active if the following prerequisites are met:
–
A complete drive configuration has been created.
– The plug-in is not connected to a device.
Editing the closed-loop settings record
Proceed as follows to edit the closed-loop settings record:
1. Actuate the
("Edit closed-loop settings record") button.
Ä
A pop-up to define the parameters opens.
2. Edit parameters of the closed-loop settings record.
3. Actuate the "Save changes" button.
The parameters are only transferred to the active parameter, once the ("Apply closed-loop settings
record to active parameter") button has been actuated.
Transferring closed-loop settings record to active parameters
A closed-loop settings record can be transferred to the active parameters by actuating the ("Apply
closed-loop settings record to active parameters") button.
CMMT-ST Plug-in
71 Festo — CMMT-ST-SW — 2019-02