Festo CMMT-ST-SW, Original Instructions Manual

Page: 461 / 616

ID Dx. Message Description
Default: save (1) 06 | 02 | 00274
(100794642) Motion command not
permissible Error
memory
Can be parameterised: No
Change to closed-loop operation not permissible because
the commutation angle is not valid
Remedy – Check task
Default: Stop category 0 (4096) Classifica-
tion
Can be parameterised: No
Default: save (1)
06 | 02 | 00275
(100794643) Change to closed-loop
operation not per-
missible
Error
memory
Can be parameterised: No
Parameter set not found
Remedy – Check parameter set selection
Default: Stop category 1 (256) Classifica-
tion
Can be parameterised: No
Default: save (1)
06 | 05 | 00097
(100991073) Parameter set not
found
Error
memory
Can be parameterised: No
Parameter set invalid
Remedy – Delete parameter set
– Overwrite parameter set (save)
Default: Stop category 1 (256) Classifica-
tion
Can be parameterised: No
Default: save (1)
06 | 05 | 00098
(100991074) Parameter set invalid
Error
memory
Can be parameterised: No
Parameter set incompatible
Remedy – Delete parameter set
– Overwrite parameter set (save)
Default: Stop category 1 (256) Classifica-
tion
Can be parameterised: No
Default: save (1)
06 | 05 | 00099
(100991075) Parameter set incom-
patible
Error
memory
Can be parameterised: No
Diagnostics and fault clearance
461 Festo — CMMT-ST-SW — 2019-02