Festo CMMT-ST-SW, Original Instructions Manual

Page: 413 / 616

ID Px. Parameters Description
113007 Current touch probe
mode Unit −
Specifies the current sources of the measured values.
This means:
–
0: primary encoder (commutation encoder)
– 1: secondary encoder
– 2: ... (depending on the product design)
Access read/−
Update effective immediately
113008 Current touch probe
source
Unit −
Specifies the currently defined signal edge of the trigger event.
This means:
–
0: inactive
– 1: positive edge
– 2: negative edge 3: positive or negative edge
Access read/−
Update effective immediately
113009 Current selection trig-
ger event
Unit −
Specifies the currently determined upper limit value for the
modulo calculation.
Access read/−
Update effective immediately
113010 Current upper limit
value modulo
Unit user defined
Specifies the currently determined lower limit value for the mod-
ulo calculation.
Access read/−
Update effective immediately
113011 Current lower limit
value modulo
Unit user defined
Specifies the lower limit for trigger signals within the modulo
range. Trigger signals at positions below the limit are ignored.
Access read/−
Update effective immediately
113012 Current lower limit
value trigger event
Unit user defined
Technology functions
413 Festo — CMMT-ST-SW — 2019-02