Festo CMMT-ST-SW, Original Instructions Manual

Page: 503 / 616

ID Px. Parameters Description
Specifies the data instance ID of the trigger signal.
Access read/write
Update effective immediately
6002 Data instance ID data
trigger
Unit −
Specifies the array ID of the trigger signal.
Access read/write
Update effective immediately
6003 Array ID data trigger
Unit −
Specifies the trigger event.
The following is possible:
–
0 = Falling edge (signal changes from 1 to 0); for numerical
trigger signals exceeding the threshold in a negative direc-
tion will initiate the trigger.
– 1 = Rising edge (signal changes from 0 to 1); for numerical
trigger signals exceeding the threshold in a positive direc-
tion will initiate the trigger.
– 2 = Any edge (any signal change); for numerical trigger sig-
nals exceeding the threshold in any direction will initiate the
trigger.
– 3 = Value change (any signal change or value change)
– 4 = Comparison (value is the same)
Access read/write
Update effective immediately
6004 Trigger event
Unit −
Specifies the trigger level value. The value is applied as the act-
ive trigger level at the start of the recording (60013). For numer-
ical trigger signals the function depends on the threshold value
of the trigger signal and for digital trigger signals on the digital
signal
Access read/write
Update effective immediately
60012 Trigger level
Unit −
Diagnostics and fault clearance
503 Festo — CMMT-ST-SW — 2019-02