Festo CMMT-ST-SW, Original Instructions Manual

Page: 399 / 616

ID Px. Parameters Description
Determines the upper limit value for the modulo calculation.
When the upper limit value is exceeded, the position jumps to
the lower limit value.
Access read/write
Update effective immediately
112702 Upper limit value
modulo
Unit user defined
Determines the lower limit value for the modulo calculation.
When the lower limit value is undershot, the position jumps to
the upper limit value.
Access read/write
Update effective immediately
112703 Lower limit value
modulo
Unit user defined
Determines the inactive time compensation for the signal
change for the first switching point. With this parameter, switch-
on delays of external components can be compensated.
Access read/write
Update effective immediately
112704 Inactive time com-
pensation of first
switching point
Unit s
Determines the inactive time compensation for the signal
change for the second switching point. With this parameter,
switch-on delays of external components can be compensated.
Access read/write
Update effective immediately
112705 Inactive time com-
pensation of second
switching point
Unit s
Through the determination of the hysteresis range, undesired
switching procedures are suppressed around the switching
point during fluctuations.
Access read/write
Update effective immediately
112706 Hysteresis
Unit user defined
Determines the switching time for time-based manual switching
(mode 4/5).
Access read/write
112707 Switching time
(manual)
Update effective immediately
Technology functions
399 Festo — CMMT-ST-SW — 2019-02