Festo CMMT-ST-SW, Original Instructions Manual

Page: 186 / 616

ID Px. Parameters Description
Displays the scaling factor for the maximum value based on the
limit value, after drive is at standstill.
Access read/−
Update effective immediately
6315 Scaling factor maxim-
um value after drive
at standstill
Unit −
Specifies the actual value for I²t monitoring of the power output
stage at standstill.
Access read/−
Update effective immediately
6316 Actual value I²t monit-
oring power output
stage at standstill
Unit A²s
Specifies the scaling factor for the warning limit based on the
limit value of the I²t monitoring of the power output stage if the
drive is at standstill.
Access read/write
Update effective immediately
6317 Scaling factor warning
limit I²t monitoring
drive at standstill
Unit −
Specifies the actual value for relative I²t monitoring of the power
output stage to the limit.
Access read/−
Update effective immediately
6332 Actual value relative
I²t monitoring of
power output stage to
limit
Unit −
Specifies the actual value for relative I²t monitoring of the power
output stage at standstill to the limit.
Access read/−
Update effective immediately
6333 Actual value relative
I²t monitoring of
power output stage at
standstill to limit
Unit −
Specifies the current actual value of the I²t monitoring of the
total current.
Access read/−
Update effective immediately
6334 Actual value I²t monit-
oring of the total cur-
rent
Unit Arms
Tab. 157 Parameters of “I²t monitoring of power output stage”
Product configuration
186 Festo — CMMT-ST-SW — 2019-02