Chevrolet 70 1969 Series, Shop Manual

Page: 793 / 913

TRANSMISSION AND CLUTCH 7-47
F ig u re 4 — R e m o v in g M a in s h a f t R e a r B e a r in g
F ig u re 5 — R e m o v in g R e v e rse Id le r S h a f t
F ig u re 6 — R e m o v in g C o u n t e r s h a f t R e a r B e a r in g
F ig u r e 7 — R e m o v in g C o u n t e r s h a f t Front B e a r in g
F ig u re 8 — C o n tro l T o w e r a n d G e a r s h ift Lever
1. Support Washer
2. Dust Cover
3. Gearshift Lever
4. Pivot Pins
5. Gearshift Lever
Support Spring
6. Control Tower Top
shaft rear bearing (32) out of transmission case far
enough to remove snap ring from bearing.
2. Using a suitable puller, remove countershaft rear
bearing (32) (fig. 6).
3. Raise front end of the countershaft (34) and lift the
assembly from transmission case.
i .
Using a crowfoot pry bar in manner shown in Figure
7, carefully pry the countershaft front bearing (44)
out of transmission case.
CHEVROLET SERIES 70-80 HEAVY DUTY TRUCK SH O P M A N U A L