Chevrolet 70 1969 Series, Shop Manual

Page: 409 / 913

TRANSMISSIONS AND CLUTCHES 7A-4
Cleaning, Inspection, and Repair
For "Cleaning and Inspection", and “ Oil
Seal Replacement” , use same procedure de­
scribed for Clark Remote Control Assembly.
Bushing Replacement
1. Press or drive shift rail yoke bushing out
of bore in shift rail yoke (9, fig. 4).
2. Using a suitable sleeve, press or drive
new bushing into bore of shift yoke.
Assembly
Assemble the remote control assembly in re­
verse order of disassembly, referring to figure 5.
C L A R K - R E M O T E C O N T R O L A SS E M B L Y
Disassembly
N O T E : Key numbers in text refer to figure 5.
1. Remove lockwire and lock screw (18), then
remove shifter shaft (5) and selector finger (16)
from remote control housing (7).
2. Remove attaching parts holding shifter shaft
collar (4) to shifter shaft (5), then remove shifter
shaft collar.
< ' '
• ■■
'C l
■ ’' V \ N e
ar'””
/ y
17
* v
/
X
20
21
22
1 Bolt 11 Lever Bolt 21 Lock Washer
2 Lock Washer 12 Selector Lever 22 Retaining Screw
3 Collar Washer 13 Nut 23 Lock Washers
4 Shifter Shaft Collar 14 Spacer 24 Bolts
5 Shifter Shaft 15 Selector A rm and Shaft Assy. 25 Shift Lever Pivot Bolt
6 Oil Seal 16 Selector Finger
26 Shift Lever Assy.
7 Control Housing 17 Selector Sleeve and Ball Assy. 27 Washer
8 Washer 18 Lock Screw 28 Nut
9 Snap Ring 19 Oil Seal
29 Shift Lever Mounting Bracket
10 Lock Washer 20 Breather Assembly
T-992
Figure 5 — Clark Remote Control Assem bly
CHEVROLET SERIES 70-80 H EAVY DUTY TRUCK S H O P M A N U A L