Chevrolet 70 1969 Series, Shop Manual

Page: 497 / 913

SHEET METAL 11-4
SUPPORT
BRACKET
^eOStSU
P FENDER
*
7
%
SUPPORT
FENDER AND SKIRT ASSEMBLY
£79
____________ FENDER SUPPORT ,
SUPPORT BRACKET- M O U N T IN G STUDSI
BOLT HOLES J V -
^ U :
Figure 7—Fender Replacement
N O T E : If all attaching hardware is installed
loosely, components can be readily aligned before
final tightening.
RU N N IN G BOARD REPLACEMENT
(Refer to Figure 8)
R E M O V A L
1. Remove two bolts, nuts, and washers which
attach running board to fender. Remove bolt spacers.
Figure 8—Running Board Replacement
2. Remove four bolts and lock washers which
attach running board to frame supports. Remove
running board.
IN S T A L L A T IO N
1. Place running board in position on frame
supports, then install loosely, four attaching bolt
nuts and lock washers.
2. With bolt spacers held in position at fender,
install bolts, flat washers, lock washers and nuts
which attach running board to fender.
N O T E : Bolt holes at front of running board
and in the frame supports are slotted for purpose
T W O A T T A C H IN G
BOLTS A N D NUTS
Figure 9 — Hood Center Panel Mounting
CHEVROLET SERIES 70 80 HEAVY DUTY TRUCK SHO P M ANUAL