Mitsubishi Electric MR-J4W2-0303B6, Instruction Manual

Page: 505 / 588

18. MR-J4W2-0303B6 SERVO AMPLIFIER
18 - 44
18.5 Switch setting and display of the servo amplifier
Switching to the test operation mode, deactivating control axes, and setting control axis No. are enabled with
switches on the servo amplifier.
On the servo amplifier display (three-digit, seven-segment LED), check the status of communication with the
servo system controller at power-on, and the axis number, and diagnose a malfunction at occurrence of an
alarm.
The control axis setting switches of MR-J4W2-0303B6 servo amplifier are aligned vertically unlike other MR-
J4 2-axis servo amplifiers; however, the use of each number switch is the same.
Test operation select switch
Disabling control axis switch for A-axis
Disabling control axis switch for B-axis
For manufacturer setting
Auxiliary axis number setting switch
Auxiliary axis number setting switch 1
2
3
4
5
6
Application
ON
123456
The items in the following table are the same as those for MR-J4W2-_B and MR-J4W3-_B servo amplifiers.
Refer to the section of the detailed explanation field for details.
Item Detailed explanation
Switches Section 4.3.1
Scrolling display Section 4.3.2
Status display of an axis Section 4.3.3