Mitsubishi Electric MR-J4W2-0303B6, Instruction Manual

Page: 490 / 588

18. MR-J4W2-0303B6 SERVO AMPLIFIER
18 - 29
Device Symbol Function and application
AND variable gain
selection CCDPS For details of device, refer to section 3.5.2.
OR variable gain
selection XCDPS
Variable gain
selection for A-axis CDPS-A
Variable gain
selection for B-axis CDPS-B
AND absolute position
undetermined CABSV
OR absolute position
undetermined XABSV
Absolute position
undetermined for A-
axis ABSV-A
Absolute position
undetermined for B-
axis ABSV-B
(3) Output signal
Signal name Symbol
Connector
Pin No.
Function and application
Encoder A-phase
pulse A
(differential line driver) LA-A
LAR-A
CN3-3
CN3-16
Refer to section 3.5.3 for details of signal.
Encoder B-phase
pulse A
(differential line driver) LB-A
LBR-A
CN3-4
CN3-17
Encoder A-phase
pulse B
(differential line driver) LA-B
LAR-B
CN3-5
CN3-18
Encoder B-phase
pulse B
(differential line driver) LB-B
LBR-B
CN3-6
CN3-19
(4) Power supply
Signal name Symbol
Connector
Pin No.
Function and application
Digital I/F
Power supply input DICOM CN3-23 Input 24 V DC (24 V DC ± 10% 250 mA) for I/O interface. The power supply capacity
changes depending on the number of I/O interface points to be used.
For sink interface, c of 24 V DC external power supply.
For source interface, connect - of the 24 V DC external power supply.
Digital I/F
Common DOCOM CN3-26 Common terminal of input signal such as EM2 of the servo amplifier. This is separated
from LG.
For sink interface, connect - of 24 V DC external power supply.
For source interface, c of the 24 V DC external power supply.
Control common LG CN3-1
CN3-14
This is for encoder output pulses (differential line driver).
Shield SD Plate Connect the external conductor of the shielded wire.