Dräger Infinity Delta, Instructions For Use Manual

Page: 56 / 614

2-6 D
ELTA
/D
ELTA
XL/K
APPA
VF8
2 M
ONITOR
S
ETUP
Max.
Channels
Determines the number of waveform
channels and parameters displayed.
• Click on 4, 5, 6, 7, or 8
NOTE: The number of waveforms
depends on the software option you
have installed (see page 1-20 for a list
of options).
Bottom
Channel
Configures the bottom waveform channel
to display a waveform or 3 parameter
boxes.
Waveform , Parameters
ECG
Channels
Determines the number and format of
ECG waveforms displayed.
Click on the following settings:
• ECG1 – Displays the primary ECG
waveform
• ECG1 & 2 – Displays 2 waveforms
• ECG1 & 2 & 3 – Displays 3
waveforms
• Cascade – Cascades ECG1 data
into second channel
ARR
Monitoring
Selects the Arrhythmia mode
(For detailed information, see page 9-5.)
• Select OFF to disable arrhythmia
monitoring.
• Select FULL to enable full arrhythmia
monitoring.
• Select BASIC to enable basic
arrhythmia monitoring.
ST
Monitoring
Enables and disables ST monitoring (for
detailed information, refer to chapter 10).
• Select ON to enable ST monitoring.
• Select OFF to disable ST monitoring.
RESP
Monitoring
Enables and disables respiration
monitoring (for detailed information, refer
to chapter 12).
• Select ON to enable respiration
monitoring.
• Select OFF to disable respiration
monitoring.
Display
Mode
Reduces Main screen clutter by
displaying only parameters associated
with a connected device (see Parameter
Priority on page 2-5).
• Select Manual to display all
parameters and assign them a
priority on the Parameter Priority
screen.
• Select Automatic to display active
parameters only.
Agent
Display
Displays an anesthetic agent parameter
box.
• Select ON to display agent.
• Select OFF to cancel display.
N2O Display Displays N
2
O/O
2
parameter box.
NOTE : This selection is ghosted unless
MultiGas or M module is
connected.
• Select ON to display N
2
O/O
2
.
• Select OFF to cancel display.
The Main Menu
Menu Item Description Available Settings