Dräger Infinity Delta Instructions For Use Manual Download Page 121

Page: 121 / 614

REND

RAPHS

VF8

ELTA

XL/K

APPA

6-3

Display Mode

There are two modes for determining the order of parameters in trend graphs:

automatic mode, which displays parameters in the order in which they appear on the

Main Screen, and manual mode, which allows you to determine the order of

parameters in the trend display.

To select the trend display mode:

1. Access the Trend Setup menu (see page 6-2).
2. Select

Display Mode

and click the rotary knob to switch between automatic

and manual modes.

Channel Assignment

You display a parameter trend by assigning parameters to one of twelve display

channels.

To display parameter trends

1. Access the Trend Setup menu (see page 6-2).
2. Select

Display Mode

and select

Manual

mode.

3. Scroll to the channel you want to format and click on it. A list of available

parameters appears.

4. Click on the parameter whose trended values you wish to view in trend

graphs.

Trend Graphs

Trend graphs display stored trend data in the form of individual graphs for each

parameter. These graphs show the behavior of the displayed parameters over a

significant time period, three channels at a time. The parameter label in its identifying

color and a scale bar appear to the left of the associated trend channel. Vertical lines in

each graph mark time divisions. Trends are updated automatically, with the most

recent data entering continuously on the right side.

Summary of Contents for Infinity Delta







































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Infinity Delta

Reviews:

Brands by name

Popular brands

Dräger Infinity Delta, Instructions For Use Manual

Search results

Summary of Contents for Infinity Delta

Reviews:

Brands by name

Popular brands