Dräger Infinity Delta, Instructions For Use Manual

Page: 472 / 614

27-4 D
ELTA
/D
ELTA
XL/K
APPA
VF8
27 B
ODY
T
EMPERATURE
Temperature Display
All temperature readings appear on the main screen according to their position in
Parameter Priority (see page 2-5). The following display conventions govern
temperature labels and values.
The monitor displays temperature values in one parameter box for each pod connector
(MultiMed, Hemo2/Hemo4). The variables “a” and “b” denote the first or second
probe connector from the MultiMed with Y-cable, NeoMed, Hemo2, Hemo4 pod or
the MPod – Quad Hemo. When acquired via the MultiMed or NeoMed pod,
temperature signals are displayed as Ta <value> or Tb <value>. (If you are using a
MultiMed without a Y-cable, only Ta displays a value.)
When monitoring temperature using the Hemo2, Hemo4 pod, or the MPod – Quad
Hemo, temperature values are further identified according to where they are
connected to the monitor. The temperature value corresponding to the device hooked
up to the Aux/Hemo2 PodCom connector is labeled T2a or T2b, while the temperature
MultiMed tempera-
ture reading (no Y-
cable)
Hemo2/4, MPod -
Quad Hemo tempera-
ture reading