Dräger Infinity Delta, Instructions For Use Manual

Page: 24 / 614

1-2 D
ELTA
/D
ELTA
XL/K
APPA
VF8
1 I
NTRODUCTION
Overview
The patient monitor is intended for adult, pediatric, and neonatal monitoring. It can be
used as a standalone device or can be connected to the Infinity network. Monitor use is
restricted to one patient at a time.
The following optional software features are available:
ACE full arrhythmia (Arrhythmia II)
Hemodynamic & oxygenation/ventilation calculations (physiological
calculations)
3-lead ST segment analysis
Waveform channel upgrades (Kappa only: 4 channels to 5 channels. Delta/
Kappa only: 5 channels to 6 channels. Delta/Delta XL/Kappa: 6 channels to 8
channels)
Aries (Advanced Review of Ischemia Event System)
One PodCom connection is standard on the Delta monitor, a second PodCom
connection is optional. Two PodCom connections are standard on the Kappa
Delta XL. Three PodCom connections are available on Kappa.
MIB (Kappa only: Advance Communication. Delta/Delta XL only: MIB II 1
to 4 Option for IDS)
Wireless Networking
OR mode (for the IDS and/or monitor)
Overview (Delta/Delta XL)
The Pick and Go feature allows you to disconnect the Delta or Delta XL monitor from
the network and transport both monitor and patient to another location; you do not
have to discharge the patient and admit him or her at another monitor. You can
therefore not only save valuable time but maintain continuous monitoring during
patient transport. At any time, you can reconnect (redock) the portable monitor to the
network via the Docking Station or the Infinity Docking Station.
NOTE: After connecting various sensors, make sure that each sensor's parameter data
such as values and a waveform (if applicable) appear on the monitor screen.